T5 solar Tire Pressure Monitor System- built-in
Description:
SP- TPMS08 Product Specification
面料:
RF frequency433.92±0.1MHzHigh frequency transmitting power≤5dBmHigh frequency modulation modeFSK(9.6Kbps)Low frequency receiving frequency125±5KHzAverage working current without RF emission≤0.25μAMaximum working current of RF emission≤7mAPressure measurement range0-8BarPressure measurement resolution0.1BarTemperature measurement resolution1℃Pressure measurement accuracy±0.1BarTemperature measurement accuracy±3℃Operating temperature range-40℃~+125℃Storage temperature range-40℃~+125℃Battery model cr2050hrCR2050HR(Power:380mAh)Sensor assembly weightbuilt in: < 36g (including valve)
Types of:
Model:
T5
Hotline:
400-8494888
Product manual:
Product parameters:
RF frequency | 433.92±0.1MHz |
High frequency transmitting power | ≤5dBm |
High frequency modulation mode | FSK(9.6Kbps) |
Low frequency receiving frequency | 125±5KHz |
Average working current without RF emission | ≤0.25μA |
Maximum working current of RF emission | ≤7mA |
Pressure measurement range | 0-8Bar |
Pressure measurement resolution | 0.1Bar |
Temperature measurement resolution | 1℃ |
Pressure measurement accuracy | ±0.1Bar |
Temperature measurement accuracy | ±3℃ |
Operating temperature range | -40℃~+125℃ |
Storage temperature range | -40℃~+125℃ |
Battery model cr2050hr | CR2050HR(Power:380mAh) |
Sensor assembly weight | built in: < 36g (including valve) |
2019
-
06
-
24
价格:
Technical requirements:1. Rated voltage: 12V DC, working voltage: dc9v-16v;2. Working temperature: - 40 ° C to + 80 ° C;3. Noise requirements: motor noise ≤ 60dB, actuator assembly noise ≤ 55dB;4. According to the requirements of durable DVP of VM ase1 actuator, the service life shall be ≥ 100000 times;5. The pull stroke of the actuator is 32.5 (+ 2 / 0) mm, and the extension and contraction time is 1200 × 0001 × 0002 × 200ms;The product is delivered with the pull rod extending 32.5mm;6. Measured locked rotor force of actuator is more than 160n;7. The actuator rotates ...
2019
-
06
-
24
价格:
Technical requirements:1. Rated voltage: 12V DC, working voltage: dc9v-16v;2. Working temperature: - 40 ° C to + 80 ° C;3. Noise requirements: motor noise ≤ 60dB, actuator assembly noise ≤ 55dB;4. According to the requirements of durable DVP of VM ase1 actuator, the service life shall be ≥ 100000 times;5. The pull stroke of the actuator is 32.5 (+ 2 / 0) mm, and the extension and contraction time is 1200 × 0001 × 0002 × 200ms;The product is delivered with the pull rod extending 32.5mm;6. Measured locked rotor force of actuator is more than 160n;7. The actuator rotates ...
2019
-
06
-
24
价格:
Technical requirements:1. Nominal voltage 13.5V, power on time 500ms, reset time 2s,2. Output force under nominal voltage ≥ 200N.3. Room temperature durability 30000 times, 1 cycle per minute4. Meet the requirements of GB / t30512-2014
2019
-
06
-
24
价格:
Technical parameters:1: standard voltage: DC12V: working voltage: 9v-16v2: locked rotor current Imax ≤ 4A3. Working angle: 26 ° ± 2 °4: output torque ≥ 0.65n. M5. Service life: ≥ 50000 open close cycles6. Others refer to (QC / t627-2013 standard for electric door lock device of automobilePerformance features:1. The turbine return is normal without jamming, jamming, impact, transmission balance, low noise, normal noise ≤ 75db.2. The space for the swing arm output to cooperate with the mechanical body is small.3. The actuator has PTC protection function.Applicable models:BYD, Geel...